Verti-Drain® 1517


The lightweight Verti-Drain® 1517 can work to a depth of 6” / 150 mm and is well suited to sensitive turf surfaces. The belt driven machine operates a high speed while giving a neat and consistent hole pattern. An optional rear roller can be added to smooth the surface and leave a neat finish.

High-speed machine
Lightweight machine with low HP requirements
Integrated parking stands for ease of operation
If additional working depth is required, consider the 22 Series Verti-Drain
SKU111.215.017
Working width (m)1.76
Working width (inch)69
Max. Working depth (mm)150
Max. Working depth (inch)6
Working speed at hole spacing 65 mm (km h)2.12
Working speed at hole spacing 2 1 2 inch (mph)1.3
Weight (kg)520
Weight (lbs)1146
Hole distance with 12 mm tines (mm)55
Hole distance with 1 2 x 6 inch tines (inch)2.17
Hole spacing distance driving direction (mm)25 - 125
Hole spacing distance driving direction (inch)1
Max. Diameter solid tine (mm)12 x 150
Max. Diameter solid tine (inch)1/2 x 6
Max. Diameter hollow tine (mm)19 x 150
Max. Diameter hollow tine (inch)3/4 x 6
Min. Tractor HP required28
Min. Lifting capacity 610 mm behind the lifting eyes (kg)600
Min. Lifting capacity 24 inch behind the lifting eyes (lbs)1322
Max. capacity with spacing 65 mm (m² hr)3706
Max. capacity with spacing 2 1 2 inch (ft² hr)39895
Three-point hitch3-point CAT 1
Rpm Max.540
Gear case oil80W90 - 0.9 Liter
LubricantEP 2
Dimensions (width mm)970
Dimensions (height mm)780
Dimensions (length mm)2050
Dimensions (width inch)38.2
Dimensions (height inch)30.7
Dimensions (length inch)80.7
KuvausMääräArtikkeli numero
Toolbox with combi tool and manual1
PTO Shaft1
Storage Legs1
Solid Tine 12x15032311.112.150
KuvausMääräArtikkeli numero
Windrow Kit for 15 Series1211.215.006
Rear Roller Kit for Verti-Drain 15171211.215.016
Turf Hold Down Kit for 12 mm tines1211.215.012
Turf Hold Down Kit for MTH1211.215.008
Solid Tine 5x12532311.105.125
Vaatii
Adapter 5mm tines (3/16")32314.205.043
 
Solid Tine 8x9532311.108.095
Vaatii
Adapter 8mm tines (5/16")32314.208.043
 
Solid Tine 8x9564311.108.095
Vaatii
MTH Block complete 1513/15178211.215.002
 
Solid Tine 8x15032311.108.150
Vaatii
Adapter 8mm tines (5/16")32314.208.043
 
Solid Tine 8x15064311.108.150
Vaatii
MTH Block complete 1513/15178211.215.002
 
Solid Tine 10x1003239200-447
Vaatii
Multi Coring Tine Head w/o tines8211.215.022
 
Hollow Tine 10x80 (8 shank)32311.210.080
Vaatii
Adapter 8mm tines (5/16")32314.208.043
 
KuvausMääräArtikkeli numero
Hollow Tine 10x80 (8 shank)64311.210.080
Vaatii
MTH Block complete 1513/15178211.215.002
 
Hollow Tine 10x125 (8 shank)32311.210.127
Vaatii
Adapter 8mm tines (5/16")32314.208.043
 
Hollow Tine 10x125 (8 shank)64311.210.127
Vaatii
MTH Block complete 1513/15178211.215.002
 
Hollow Tine 16x150 (12 shank)32311.216.150
Hollow Tine 19x150 (12 shank)32311.219.150
Hollow Tine 16x110 (19 shank)32311.219.138
Vaatii
Multi Coring Tine Head w/o tines8211.215.022
 
Hollow Tine 21x125 (19 shank)329990075
Vaatii
Multi Coring Tine Head w/o tines8211.215.022
 
Hollow Tine 19x110 (19 shank)32311.219.158
Vaatii
Multi Coring Tine Head w/o tines8211.215.022
 
Hollow Tine 19x125 (19 shank)32311.219.159
Vaatii
Multi Coring Tine Head w/o tines8211.215.022
 
Hollow Tine 19x150 (12 shank)32311.219.150
Vaatii
Multi Coring Tine Head w/o tines8211.215.022
 
Cross Tine 12x90 (8 shank)329990020
Vaatii
Adapter 8mm tines (5/16")32314.208.043
 
Cross Tine 12x90 (8 shank)649990020
Vaatii
MTH Block complete 1513/15178211.215.002
 
Cross Tine 12x90 (12 shank)32311.812.090
Chisel Tine 4.8x19x120 (12 shank)32311.619.120
Chisel Tine 4.8x19x175 (12 shank)32311.619.175
Chisel Tine 5x30x90 (19 shank)32311.619.127
Vaatii
Multi Coring Tine Head w/o tines8211.215.022
 
Cross Tine 19x120 (12 shank)329990021
* Tämä tuote ei välttämättä ole saatavilla alueellasi – Redexim pidättää oikeuden tehdä muutoksia tuotteen teknisiin tietoihin ilmoittamatta, tekniset tiedot saattavat vaihdella alueellisesti – piirrokset ovat vain suuntaa antavia.
Click to access the login or register cheese