Verti-Drain® 7212


The Verti-Drain® 7212 is well suited to lower HP tractors, this very capable model for aeration to a depth of 25cm /10” on the more sensitive turf areas. The 7212 is particularly popular on hard to reach areas due to its overall dimensions while maintaining all the features of larger Verti-Drains.

Compact yet capable
Low tractor HP requirment
Broad range of tine options
See the Verti-Drain® 7215 for a wider working width
SKU 7212
Working width (m) 1.2
Working width (inch) 48
Max. Working depth (mm) 250
Max. Working depth (inch) 10
Working speed at hole spacing 65 mm (km h) 1
Working speed at hole spacing 2 1 2 inch (mph) 0.6
Weight (kg) 483
Weight (lbs) 1062
Hole distance with 12 mm tines (mm) 65
Hole distance with 1 2 x 6 inch tines (inch) 2.5
Hole distance with 18 mm tines (mm) 100
Hole distance with 3 4 x 9 inch tines (inch) 4
Hole spacing distance driving direction (mm) 25 - 165
Hole spacing distance driving direction (inch) 1 - 6-1/2
Max. Diameter solid tine (mm) 18 x 250
Max. Diameter solid tine (inch) 3/4 x 10
Max. Diameter hollow tine (mm) 25 x 250
Max. Diameter hollow tine (inch) 1 x 10
Min. Tractor HP required 18
Max. capacity with spacing 65 mm (m² hr) 1200
Max. capacity with spacing 2 1 2 inch (ft² hr) 11000
Three-point hitch 3-point CAT 1
Rpm Max. 500
Gearbox oil 80W90 3 liter
Lubricant EP 2
Dimensions (width mm) 1350
Dimensions (height mm) 800
Dimensions (length mm) 1100
Dimensions (width inch) 44
Dimensions (height inch) 32
Dimensions (length inch) 54
Slip clutch setting 450 NM (3983 lbf-in)
Description Quantity Article number
Toolbox with combi tool and manual 1
PTO Shaft 1
Solid Tine 12x250mm (1/2x10") 18 2381837
Description Quantity Article number
Windrow Kit for 72 Series 1 211.721.016
Core Collector 1 9100080
Turf Hold Down Kit for 12mm tines -7212 1 211.721.014
Turf Hold Down Kit for 18mm tines -7212 1 211.721.012
Solid Tine 5x125mm (3/16x5") 18 311.105.125
Requires
Adapter 5mm tines (3/16") 18 314.205.043
 
Solid Tine 5x125mm (3/16x5") 126 311.105.125
Requires
MTH Block for (21) tines 5mm (3/16") 6 314.425.170
 
Solid Tine 8x150mm (5/16x6") 18 311.108.150
Requires
Adapter 8mm tines (5/16") 18 314.208.043
 
Solid Tine 8x150mm (5/16x6") 36 311.108.150
Requires
MTH Block for (6) tines 8mm (5/16") 6 9990206
 
Solid Tine 8x175mm (5/16x7") 18 9990056
Requires
Adapter 8mm tines (5/16") 18 314.208.043
 
Solid Tine 8x175mm (5/16x7") 36 9990056
Requires
MTH Block for (6) tines 8mm (5/16") 6 9990206
 
Solid Tine 8x250mm (5/16x10") 18 9990059
Requires
Adapter 8mm tines (5/16") 18 314.208.043
 
Description Quantity Article number
Solid Tine 12x150mm (1/2x6") 18 311.112.150
Solid Tine 12x200mm (1/2x8") 18 311.112.200
Solid Tine 18x200mm (3/4x8") 12 311.118.200
Solid Tine 18x250mm (3/4x10") 12 2381841
Hollow Tine 10x6x80mm (3/8x1/4x3") 18 311.210.080
Requires
Adapter 8mm tines (5/16") 18 314.208.043
 
Hollow Tine 10x6x80mm (3/8x1/4x3") 36 311.210.080
Requires
MTH Block for (6) tines 8mm (5/16") 6 9990206
 
Hollow Tine 10x6x125mm (3/8x1/4 x 5") MD:8mm 18 311.210.127
Requires
Adapter 8mm tines (5/16") 18 314.208.043
 
Hollow Tine 10x6x125mm (3/8x1/4 x 5") MD:8mm 36 311.210.127
Requires
MTH Block for (6) tines 8mm (5/16") 6 9990206
 
Hollow Tine 16/10x150mm (5/8x3/8x6") MD:12mm 18 311.216.150
Hollow Tine 16/10x175mm (5/8x3/8x7") MD:12mm 18 9990022
Hollow Tine 19/12x150mm (5/8x3/8x6") MD:12mm 18 311.219.150
Hollow Tine 19/12x200mm (3/4x1/2x8") MD: 18mm 12 311.219.200
Hollow Tine 19/12x200mm (3/4x1/2x8")MD: 12mm 18 311.219.201
Hollow Tine 19/12x225mm (3/4x1/2x9") MD: 12mm 12 311.219.225
Hollow Tine 19/12x225mm (3/4x1/2x9") MD:12mm 18 311.219.226
Description Quantity Article number
Hollow Tine 19/12x250mm (3/4x1/2x10") MD:18mm 12 9990023
Hollow Tine 19/12x250mm (3/4x1/2x10") MD:12mm 18 9990040
Hollow Tine 25/16x200mm (1x5/8x10") MD: 18mm 12 311.225.200
Hollow Tine 25/16x225mm (1x5/8x9") MD:18mm 12 311.225.225
Hollow Tine 25/17x250mm (1x5/8x10") MD: 18mm 12 9990024
Cross Tine 12x90mm (1/2x3 1/2") MD: 8mm 18 9990020
Requires
Adapter 8mm tines (5/16") 18 314.208.043
 
Cross Tine 12x90mm (1/2x3 1/2") MD: 8mm 36 9990020
Requires
MTH Block for (6) tines 8mm (5/16") 6 9990206
 
Cross Tine 12x90mm (1/2x3 1/2") MD:12mm 18 311.812.090
Cross Tine 19x120mm (3/4x5") MD:12mm 18 9990021
Chisel Tine 4.8x19x175mm (3/16x3/4x7") MD:12mm 18 311.619.175
Chisel Tine 4.8x19x120mm (3/16x3/4x4 3/4") MD:12mm 18 311.619.120
* This product may not be available for your region.
Click to access the login or register cheese