Let op: Je maakt gebruik van een sterk verouderde webbrowser waardoor deze website mogelijk niet goed functioneert, stap nu over op een moderne webbrowser.

Verti-Drain® 2220


The robust Verti-Drain® 2220 is a high speed unit, capable of handling a 24mm / 1” diameter tine and working to depths of 22cm / 9”. Thanks to its heavy duty construction, the 2220 is ideal for a range of creation applications where durability and speed is key

Heavy-duty
High-speed aerator
Multiple tine options
Consider the 2216 for smaller areas
SKU 111.122.020
Working width (m) 2.08
Working width (inch) 82
Max. Working depth (mm) 225
Max. Working depth (inch) 9
Working speed at hole spacing 65 mm 1.79
Working speed at hole spacing 2-1 2 inch (mph) 1.1
Weight (kg) 1155
Weight (lbs) 2541
Hole distance with 12 mm tines (mm) 65
Hole distance with 1 2 x 6 inch tines (inch) 2.5
Hole distance with 18 mm tines (mm) 130
Hole distance with 3 4 x 9 inch tines (inch) 5.12
Hole spacing distance driving direction (mm) 25 - 195
Hole spacing distance driving direction (inch) 1 - 7.5
Max diameter solid tine (mm) 24 x 225
Max diameter solid tine (inch) 1 x 9
Max diameter hollow tine (mm) 25 x 225
Max diameter hollow tine (inch) 1 x 9
Min. Tractor HP required 50
Min. lifting capacity (kg) 1300
Min. lifting capacity (LBS) 2866
Max. capacity with spacing 65 mm (m² hr) 3728
Max. capacity with spacing 2-1 2 inch (ft² hr) 40128
Three-point hitch 3-Point CAT 1/2
Rpm Max. 540
Gearbox oil 80W90 5.5 liter
Lubricant EP 2
Dimensions (width mm) 2220
Dimensions (height mm) 900
Dimensions (length mm) 1210
Dimensions (width inch) 87.4
Dimensions (height inch) 35.4
Dimensions (length inch) 47.6
Slip clutch setting 550 NM (4868 lbf-in)
Toolbox with combi tool and manual
PTO Shaft
Solid Tine 18x225mm (3/4x9")
Description Quantity Article number
Windrow Kit for 2220 1 211.122.008
Hydraulic Depth Control System for 2220 1 211.122.006
Turf Hold Down Kit for 12mm tines - 2220 1 211.122.004
Turf Hold Down Kit for 24mm tines - 2220 1 211.122.002
Solid Tine 8x150mm (5/16x6") 32 311.108.150
Requires
Adapter 8mm tines (5/16") 32 314.208.043
 
Solid Tine 8x150mm (5/16x6") 64 311.108.150
Requires
MTH Block for (8) tines 8mm (5/16") 8 9990211
 
Solid Tine 8x175mm (5/16x7") 32 9990056
Requires
Adapter 8mm tines (5/16") 32 314.208.043
 
Solid Tine 8x175mm (5/16x7") 64 9990056
Requires
MTH Block for (8) tines 8mm (5/16") 8 9990211
 
Solid Tine 8x250mm (5/16x10") 32 9990059
Requires
Adapter 8mm tines (5/16") 32 314.208.043
 
Solid Tine 12x150mm (1/2x6") 32 311.112.150
Solid Tine 12x200mm (1/2x8") 32 311.112.200
Solid Tine 18x200mm (3/4x8") 16 311.118.200
Requires
Adapter 18mm tines (3/4") 16 2451800
 
Description Quantity Article number
Solid Tine 24x225mm 16 311.124.225
Hollow Tine 10x6x80mm (3/8x1/4x3") 32 311.210.080
Requires
Adapter 8mm tines (5/16") 32 314.208.043
 
Hollow Tine 10x6x80mm (3/8x1/4x3") 64 311.210.080
Requires
MTH Block for (8) tines 8mm (5/16") 8 9990211
 
Hollow Tine 10x6x125mm (3/8x1/4 x 5") MD:8mm 64 311.210.127
Requires
MTH Block for (8) tines 8mm (5/16") 8 9990211
 
Hollow Tine 10x6x125mm (3/8x1/4 x 5") MD:8mm 32 311.210.127
Requires
Adapter 8mm tines (5/16") 32 314.208.043
 
Hollow Tine 16/10x150mm (5/8x3/8x6") MD:12mm 32 311.216.150
Hollow Tine 16/10x175mm (5/8x3/8x7") MD:12mm 32 9990022
Hollow Tine 19/12x150mm (5/8x3/8x6") MD:12mm 32 311.219.150
Hollow Tine 19/12x200mm (3/4x1/2x8")MD: 12mm 32 311.219.201
Hollow Tine 19/12x200mm (3/4x1/2x8") MD: 18mm 16 311.219.200
Requires
Adapter 18mm tines (3/4") 16 2451800
 
Hollow Tine 19/12x225mm (3/4x1/2x9") MD:12mm 32 311.219.226
Hollow Tine 19/12x225mm (3/4x1/2x9") MD: 12mm 16 311.219.225
Requires
Adapter 18mm tines (3/4") 16 2451800
 
Hollow Tine 25/16x225mm (1x5/8x9") MD:18mm 16 311.225.225
Requires
Adapter 18mm tines (3/4") 16 2451800
 
Hollow Tine 25/16x200mm (1x5/8x10") MD: 18mm 16 311.225.200
Requires
Adapter 18mm tines (3/4") 16 2451800
 
Cross Tine 12x90mm (1/2x3 1/2") MD: 8mm 32 9990020
Requires
Adapter 8mm tines (5/16") 32 314.208.043