Essential Guide to Redexim Tines
Redexim aeration equipment uses tines to improve soil oxygenation. The Redexim tines come in a wide range of sizes and types, making it effortless to adapt to the needs of various soil and turf conditions. The Redexim essential guide to tines will give you information on size, quality, and even material so that you know what to look for when purchasing replacement Genuine Redexim tines.
Get the most out of your Redexim equipment by using Genuine Redexim tines built for quality, efficiency, and longevity.
Understanding Tines and Their Role in Turfgrass Management
Having genuine tines installed in your Verti-Drain will only help to improve aeration processes and overall turf health. Some of the things you can expect from using the genuine tines include:
- Reduced toxic gas accumulation
- Decreased soil density, even up to 16 inches deep
- Improved water infiltration and air exchange
- Assistance with top dressing and overall turf aesthetics
- Weed and disease control without the use of chemicals
- More playable sports surfaces
- Improved oxygen and CO2 balance for better plant health
- Better drainage, root growth, and drought resistance
Redexim Tines Material and Quality
Genuine Redexim tines have been tested and proven to be among the highest quality in the industry. All Redexim tines are manufactured with longevity and durability in mind.
Their exceptional resilience is achieved through a unique manufacturing process that involves the use of high-grade Chromium Molybdenum alloy. This material is then subjected to a heat-treatment hardening process and finished with a wax coating to prevent rust during storage. The culmination of these processes produces a tine that is not only less prone to snapping but also capable of withstanding higher impacts and more suitable for repetitive use.
All genuine Redexim tines are made to match each specific model Verti-Drain, as the crank and tine heads have been designed to enter and exit the ground at specific intervals to suit the specific tine measurements. This will ensure a clean finish. Redexim tines can be replaced effortlessly when required. A combination of tine sizes and lengths are available.
Types of Redexim Tines
The solid tines and hollow tines from Redexim are the most commonly used across the turf management industry. However, in situations where surface-level aeration is needed, or deep penetration and soil fracturing would be beneficial, there are other tine options to consider.
| Type of Tine | Best Used For |
| Solid Tines | Improving minor compaction, temporary aeration, and not removing soil |
| Hollow Tines | Removing soil cores, improving heavy compaction, long-term aeration |
| Cross Tines | Enhancing surface-level aeration and reducing surface hardness |
| Chisel Tines | Breaking up the surface crust, minimal soil disruption |
| Cornetto Tine | Deep aeration with minimal surface disruption |
| Grenade Tine | Deep penetration and soil fracturing, reducing compaction |
| Composed Hollow Tine | Combining the benefits of hollow and solid tines, versatile aeration |
| Coring Tine | Extracting cores for thorough aeration and compaction relief |
Size Variations and Their Impacts
The size of a tine used in the aeration process should be based on turf conditions, management goals, soil wetness and texture, frequency of aeration, and environmental considerations. Here is a brief overview of tine size variations and their impacts on soil.
Large Tines
Large tines up to a maximum of 400mm (16’’) and 24mm (1’’) in diameter are designed to eliminate deep soil compaction. Although large tines are known for creating the most disturbance, they offer quite a bit of benefit to the soil and turf.
Standard Tines
A standard tine around 150mm (6’’) with 12mm (1/2’’) diameter is for aeration of the top soil layers. Standard tines are often alternated with deep tines to ensure there are no long-term issues with soil compaction past the depth of the standard tine.
Deep Tines
Deep tines, typically around 200mm (8’’) and 18mm (¾’’) diameter, are commonly used in the Redexim Verti-Drain. These Verti-Drain tines are for heavily trafficked and compacted areas. With deep tine aeration, turf health can be improved, and turf compaction is reduced to make the soil healthy and safer for turf sports. Deep tine aeration should also improve turf stress tolerance.
Micro Tines
The micro tines, typically 100mm (4’’) at the most, with about 5-8mm (5/16’’) in diameter, can be used for thatching surface and helping improve the flow of oxygen and gas exchange. Micro tines are often used on golf courses, and putting greens in situations where minimal disturbance is necessary.
Environmental Considerations
With increased regulations in the turf care industry, environmental considerations for aerating have become more challenging to manage. Reduction in chemical usage has made it imperative to follow mechanical aeration processes as a long-term solution.
In addition, enhanced water conservation has made proper infiltration and water retention another issue turfgrass managers must battle. Proper use of tines will lead to reduced water usage and runoff.
Finally, the use of the correct times supports microorganisms, natural soil development, and turf growth. The turf remains more resilient and keeps diseases and pests away.
Maintenance and Care of Genuine Redexim Tines
Tines are considered consumable andneed to be replaced over time, but following manufacturer guidelines for proper maintenance can improve the longevity of the tines in your Verti-Drain or Verti-Core equipment.
- Regularly inspect tines for wear, damage, and bending, and replace and repair at first signs of damage.
- After each use, clean tines throughout to remove all debris and eliminate the possibility of rust
- Keep tines lubricated with copper slip as recommended to reduce the overall amount of friction and wear.
- Always store tines in a dry environment where they will not rust
- To improve the effectiveness of aeration, replace tines as needed; this will help avoid issues with the turf as well
Choosing The Right Tines For Your Needs
When choosing tines, there are a few essential considerations to make.
The first is the tine type and size. Hollow tines are for core aeration and to improve drainage. Solid tines provide less invasive aeration with quicker recovery times. The depth of the aeration will also determine how much total length you need for your tines.
If your soil is more clay or sand based, the tine you use will also vary. Aeration strategies can change from one location to another, and also depending on the season.
Finally, ensure that the tine you choose matches your aeration goal. If you are working on improving drainage, enhancing root growth, or overseeding, the tine you choose will make all the difference.
Final Thoughts
With nearly forty years of history in the business, Redexim understands the importance of carrying high-quality tines in various lengths, sizes, and types. Always use genuine Redexim tines to ensure that your Verti-Drain is running smoothly to achieve optimal results for aeration all year round.
Don’t hesitate to contact your local Redexim Partner for more information about genuine tines and options available to suit your needs.