Laser-Grader 1500TPP dual pole
The Laser-Grader 1500 TPP has a 6.5 hp engine to power the hydraulic system independently from the towing unit. Dual PVG16 valves are fitted as standard to allow the machine to be controlled to a dual laser receiver for the most accurate control of the working depths and a perfectly level finish
| Ripping tines as standard |
| Large wheels for rough surfaces |
| Ideal for golf tees and baseball diamonds |
| Consider the Laser-Grader 1800 dual pole for larger areas |
SKU | 192.150.006 |
Engine | 6.5 HP B&S |
Operation | Tractor or bunker rake pulled |
Working width (m) | 1.5 |
Working width (inch) | 59.9 |
Max. Working depth (inch) | Depending on the conditions and the required result |
Hopper capacity (m3) | Depending on the conditions and the required result |
Max. Working speed (km h) | Depending on the conditions and the required result |
Max. Working speed (mph) | Depending on the conditions and the required result |
Weight (kg) | 406 |
Weight (lbs) | 895 |
Number of tines | 6 ripping tines |
Hydraulic oil | Tellus 46 |
Content of the hydraulic oil tank | 15litres ( 0.52 cu.ft) |
Min. Tractor HP required | n/a – suitable towing vehicle |
Min. Pressure (bar) | 1.5 |
Min. Pressure (psi) | 21.75 |
Lubricant | EP 2 |
Dimensions (width mm) | 1.5 |
Dimensions (height mm) | 1.2 |
Dimensions (length mm) | 2.5 |
Dimensions (width inch) | 59 |
Dimensions (height inch) | 47.1 |
Dimensions (length inch) | 98.4 |
Description | Quantity | Article number |
Toolbox and manual | 1 | |
* Check availability in your region.