Let op: Je maakt gebruik van een sterk verouderde webbrowser waardoor deze website mogelijk niet goed functioneert, stap nu over op een moderne webbrowser.

Verti-Drain® 1513


The lightweight Verti-Drain® 1513 can work to a depth of 6” / 150mm and is well suited to sensitive turf surfaces. The belt driven machine operates a high speed while giving a neat and consistent hole pattern. An optional rear roller can be added to smooth the surface and leave a neat finish

High-speed machine
Lightweight machine with low HP requirements
Integrated parking stands for ease of operation
If additional working depth is required, consider the 22 Series Verti-Drain
SKU 111.215.013
Working width (m) 1.32
Working width (inch) 52
Max. Working depth (mm) 150
Max. Working depth (inch) 6
Working speed at hole spacing 65 mm 2.12
Working speed at hole spacing 2-1 2 inch (mph) 1.3
Weight (kg) 448
Weight (lbs) 985
Hole distance with 12 mm tines (mm) 55
Hole distance with 1 2 x 6 inch tines (inch) 2.17
Hole spacing distance driving direction (mm) 25 - 125
Hole spacing distance driving direction (inch) 1-7.5
Max diameter solid tine (mm) 12 x 150
Max diameter solid tine (inch) 1/2 x 6
Max diameter hollow tine (mm) 19 x 150
Max diameter hollow tine (inch) 3/4 x 6
Min. Tractor HP required 25
Min. lifting capacity (kg) 650
Min. lifting capacity (LBS) 1450
Max. capacity with spacing 65 mm (m² hr) 2822
Max. capacity with spacing 2-1 2 inch (ft² hr) 30374
Three-point hitch 3-point CAT 1
Rpm Max. 540
Gearbox oil 80W90 - 0.9L
Lubricant EP 2
Dimensions (width mm) 970
Dimensions (height mm) 780
Dimensions (length mm) 1610
Dimensions (width inch) 38.2
Dimensions (height inch) 30.7
Dimensions (length inch) 63.4
Toolbox with combi tool and manual
PTO Shaft
Storage Legs
Solid Tine 12x150mm (1/2x6")
Description Quantity Article number
Windrow Kit for 15 Series 1 211.215.006
Rear Roller Kit for Verti-Drain 1513 1 211.215.004
Turf Hold Down Kit for 12mm tines 1 211.215.000
Turf Hold Down Kit for MTH 1 211.215.008
Solid Tine 5x125mm (3/16x5") 24 311.105.125
Requires
Adapter 5mm tines (3/16") 24 314.205.043
 
Solid Tine 8x95 (5/16x 3 13/16") 24 311.108.095
Requires
Adapter 8mm tines (5/16") 24 314.208.043
 
Solid Tine 8x95 (5/16x 3 13/16") 48 311.108.095
Requires
MTH Block complete 1513/1517 6 211.215.002
 
Solid Tine 8x150mm (5/16x6") 24 311.108.150
Requires
Adapter 8mm tines (5/16") 24 314.208.043
 
Solid Tine 8x150mm (5/16x6") 48 311.108.150
Requires
MTH Block complete 1513/1517 6 211.215.002
 
Solid Tine 8x175mm (5/16x7") 24 9990056
Requires
Adapter 8mm tines (5/16") 24 314.208.043
 
Solid Tine 8x175mm (5/16x7") 48 9990056
Requires
MTH Block complete 1513/1517 6 211.215.002
 
Description Quantity Article number
Solid Tine 10x100mm (3/8x4") 24 39200-447
Requires
Multi Coring Tine Head w/o tines 6 211.215.022
 
Hollow Tine 10x6x80mm (3/8x1/4x3") 24 311.210.080
Requires
Adapter 8mm tines (5/16") 24 314.208.043
 
Hollow Tine 10x6x80mm (3/8x1/4x3") 48 311.210.080
Requires
MTH Block complete 1513/1517 6 211.215.002
 
Hollow Tine 10x6x125mm (3/8x1/4 x 5") MD:8mm 24 311.210.127
Requires
Adapter 8mm tines (5/16") 24 314.208.043
 
Hollow Tine 10x6x125mm (3/8x1/4 x 5") MD:8mm 48 311.210.127
Requires
MTH Block complete 1513/1517 6 211.215.002
 
Hollow Tine 16/10x150mm (5/8x3/8x6") MD:12mm 24 311.216.150
Hollow Tine 19/12x150mm (5/8x3/8x6") MD:12mm 24 311.219.150
Hollow Tine 16/7x110mm (5/8x1/4x4 3/8") MD:19 ((top ejecting)) 24 311.219.138
Requires
Multi Coring Tine Head w/o tines 6 211.215.022
 
Hollow Tine 21x12x125mm (13/16x1/2x5") 24 9990075
Requires
Multi Coring Tine Head w/o tines 6 211.215.022
 
Hollow Tine 19x10x110mm (3/4x3/8x4 3/8") MD:19mm (top ejecting) 24 311.219.158
Requires
Multi Coring Tine Head w/o tines 6 211.215.022
 
Hollow Tine 19x10x125mm (3/4x3/8x5") MD:19mm 24 311.219.159
Requires
Multi Coring Tine Head w/o tines 6 211.215.022
 
Hollow Tine 19/12x150mm (5/8x3/8x6") MD:12mm 24 311.219.150
Requires
Multi Coring Tine Head w/o tines 6 211.215.022
 
Cross Tine 12x90mm (1/2x3 1/2") MD: 8mm 24 9990020
Requires
Adapter 8mm tines (5/16") 24 314.208.043
 
Cross Tine 12x90mm (1/2x3 1/2") MD: 8mm 48 9990020
Requires
MTH Block complete 1513/1517 6 211.215.002
 
Cross Tine 12x90mm (1/2x3 1/2") MD:12mm 24 311.812.090
Cross Tine 19x120mm (3/4x5") MD:12mm 24 9990021
Chisel Tine 4.8x19x120mm (3/16x3/4x4 3/4") MD:12mm 24 311.619.120
Chisel Tine 4.8x19x175mm (3/16x3/4x7") MD:12mm 24 311.619.175
Chisel Tine 5x30x90mm (3/16x1 3/16x3 1/2") MD:19mm 24 311.619.127
Requires
Multi Coring Tine Head w/o tines 6 211.215.022