Verti-Drain® 2519


The all-new 2519 Verti-Drain combines robustness with versatility. This high-speed model can achieve a maximum working depth of 10”/250mm with a range of tines, while offering unrivalled productivity; this makes the 2519 the obvious choice for applications where agility and productivity are key.

High-speed
Suitable for a range of surface types
Hollow or solid tines
Do you require penetration of heavy soils? If so, consider the 75 or 76 Series Verti-Drain
SKU 111.251.904
Working width (m) 1.95
Working width (inch) 76.7
Max. Working depth (mm) 250
Max. Working depth (inch) 10
Working speed at hole spacing 65 mm (km h) 1.79
Working speed at hole spacing 2 1 2 inch (mph) 1.1
Weight (kg) 900
Weight (lbs) 1984
Max. Diameter solid tine (mm) 18 x 250
Max. Diameter solid tine (inch) 3/4 x 10
Max. Diameter hollow tine (mm) 25 x 250
Max. Diameter hollow tine (inch) 1 x 10
Min. Tractor HP required 60
Min. Lifting capacity 610 mm behind the lifting eyes (kg) 920
Min. Lifting capacity 24 inch behind the lifting eyes (lbs) 2028.25
Max. capacity with spacing 65 mm (m² hr) 3490
Max. capacity with spacing 2 1 2 inch (ft² hr) 37566
Three-point hitch 3-Point CAT 1/2
Rpm Max. 540
Gearbox oil 80W90 - 1.2 (0.31 gallon)
Lubricant EP 2
Dimensions (width mm) 2314
Dimensions (height mm) 963
Dimensions (length mm) 1250
Dimensions (width inch) 91.1
Dimensions (height inch) 37.9
Dimensions (length inch) 49.2
Slip clutch setting 550 Nm (4868 lbf-in)
Description Quantity Article number
Solid Tine 12x250mm (1/2x10") 30 2381837
Toolbox with combi tool and manual 1
PTO Shaft 1
Storage Legs 1
Description Quantity Article number
Windrow Kit for 2519 1 211.251.908
Turf Hold Down Kit for 12mm tines - 2519 1 211.251.902
Turf Hold Down Kit for 18mm tines - 2519 1 211.251.904
Anti-vibration system 22 serie 1 211.700.500
Solid Tine 5x125mm (3/16x5") 30 311.105.125
Requires
Adapter 5mm tines (3/16") 30 314.205.043
 
Solid Tine 5x125mm (3/16x5") 210 311.105.125
Requires
MTH Block for (21) tines 5mm (3/16") 10 314.425.170
 
Solid Tine 8x150mm (5/16x6") 30 311.108.150
Requires
Adapter 8mm tines (5/16") 30 314.208.043
 
Solid Tine 8x150mm (5/16x6") 60 311.108.150
Requires
MTH Block for (6) tines 8mm (5/16") 10 9990206
 
Solid Tine 8x175mm (5/16x7") 30 9990056
Requires
Adapter 8mm tines (5/16") 30 314.208.043
 
Solid Tine 18x200mm (3/4x8") 20 311.118.200
Solid Tine 8x175mm (5/16x7") 60 9990056
Requires
MTH Block for (6) tines 8mm (5/16") 10 9990206
 
Solid Tine 18x250mm (3/4x10") 20 2381841
Description Quantity Article number
Solid Tine 8x250mm (5/16x10") 30 9990059
Requires
Adapter 8mm tines (5/16") 30 314.208.043
 
Hollow Tine 10x6x80mm (3/8x1/4x3") 30 311.210.080
Requires
Adapter 8mm tines (5/16") 30 314.208.043
 
Solid Tine 12x150mm (1/2x6") 30 311.112.150
Hollow Tine 10x6x80mm (3/8x1/4x3") 60 311.210.080
Requires
MTH Block for (6) tines 8mm (5/16") 10 9990206
 
Solid Tine 12x200mm (1/2x8") 30 311.112.200
Hollow Tine 10x6x125mm (3/8x1/4 x 5") MD:8mm 30 311.210.127
Requires
Adapter 8mm tines (5/16") 30 314.208.043
 
Hollow Tine 10x6x125mm (3/8x1/4 x 5") MD:8mm 60 311.210.127
Requires
MTH Block for (6) tines 8mm (5/16") 10 9990206
 
Hollow Tine 16/10x150mm (5/8x3/8x6") MD:12mm 30 311.216.150
Hollow Tine 16/10x175mm (5/8x3/8x7") MD:12mm 30 9990022
Hollow Tine 19/12x150mm (5/8x3/8x6") MD:12mm 30 311.219.150
Hollow Tine 19/12x200mm (3/4x1/2x8") MD: 18mm 20 311.219.200
Hollow Tine 19/12x200mm (3/4x1/2x8")MD: 12mm 30 311.219.201
Hollow Tine 19/12x225mm (3/4x1/2x9") MD: 12mm 20 311.219.225
Hollow Tine 19/12x225mm (3/4x1/2x9") MD:12mm 30 311.219.226
Description Quantity Article number
Hollow Tine 19/12x250mm (3/4x1/2x10") MD:12mm 30 9990040
Hollow Tine 19/12x250mm (3/4x1/2x10") MD:18mm 20 9990023
Hollow Tine 25/16x200mm (1x5/8x10") MD: 18mm 20 311.225.200
Hollow Tine 25/16x225mm (1x5/8x9") MD:18mm 20 311.225.225
Hollow Tine 25/17x250mm (1x5/8x10") MD: 18mm 20 9990024
Cross Tine 12x90mm (1/2x3 1/2") MD:12mm 30 311.812.090
Cross Tine 19x120mm (3/4x5") MD:12mm 30 9990021
Chisel Tine 4.8x19x120mm (3/16x3/4x4 3/4") MD:12mm 30 311.619.120
Cross Tine 12x90mm (1/2x3 1/2") MD: 8mm 60 9990020
Requires
MTH Block for (6) tines 8mm (5/16") 10 9990206
 
Chisel Tine 4.8x19x175mm (3/16x3/4x7") MD:12mm 30 311.619.175
Cross Tine 12x90mm (1/2x3 1/2") MD: 8mm 30 9990020
Requires
Adapter 8mm tines (5/16") 30 314.208.043
 
* This product may not be available for your region - Redexim reserves the right to change specification of products without prior notice, specifications of equipment may vary globally - illustrations are for visual representation only.
Click to access the login or register cheese