Verti-Drain® 7626


The 7626 is the largest Verti-Drain in the range, with a heavy-duty gearbox & hydraulic depth control to allow for working depth changes on the move. It is well suited to the toughest of soil conditions, with a 102”/260 cm working width it has the ability to cover large areas with ease.

Heavy duty tool for tough conditions
Large range of tine options
Hydraulic depth control as standard
SKU7626
Working width (m)2.6
Working width (inch)102
Max. Working depth (mm)400
Max. Working depth (inch)16
Working speed at hole spacing 65 mm (km h)0.75
Working speed at hole spacing 2 1 2 inch (mph)0.47
Weight (kg)2010
Weight (lbs)4431
Hole distance with 12 mm tines (mm)65
Hole distance with 1 2 x 6 inch tines (inch)2.5
Hole distance with 24 mm tines (mm)129
Hole distance with 1 x 16 inch tines (inch)5
Hole spacing distance driving direction (mm)50-195
Hole spacing distance driving direction (inch)2 - 7-1/2
Max. Diameter solid tine (mm)24 x 400
Max. Diameter solid tine (inch)1 x 16
Max. Diameter hollow tine (mm)32 x 300
Max. Diameter hollow tine (inch)1-1/4 x 12
Min. Tractor HP required65
Min. Lifting capacity 610 mm behind the lifting eyes (kg)2300
Min. Lifting capacity 24 inch behind the lifting eyes (lbs)5070
Max. capacity with spacing 65 mm (m² hr)1950
Max. capacity with spacing 2 1 2 inch (ft² hr)20989
Three-point hitch3-point CAT 2
Rpm Max.500
Gear case oil80W90 - 6.5
LubricantEP2
Slip clutch setting1100 Nm
DescriptionQuantityArticle number
Toolbox with combi tool and manual1
PTO Shaft1
Hydraulic Depth Control System for 76 Series1
Solid Tine 24x400202382640
DescriptionQuantityArticle number
Turf Hold Down Kit for 12mm tines - 76261211.762.002
Turf Hold Down Kit for 24mm tines - 76261211.762.004
Anti-vibration sytem 76 serie1211.700.502
Wheel Kit for 76261211.762.006
Rotating Brush for 7526 / 76261211.762.106
Solid Tine 5x12540311.105.125
Requires
Adapter 5mm tines (3/16")40314.205.043
 
Solid Tine 8x15040311.108.150
Requires
Adapter 8mm tines (5/16")40314.208.043
 
Solid Tine 8x15080311.108.150
Requires
MTH Block for (8) tines 8mm (5/16")109990211
 
Solid Tine 8x175409990056
Requires
Adapter 8mm tines (5/16")40314.208.043
 
Solid Tine 8x175809990056
Requires
MTH Block for (8) tines 8mm (5/16")109990211
 
Solid Tine 8x250409990059
Requires
Adapter 8mm tines (5/16")40314.208.043
 
Solid Tine 12x15040311.112.150
DescriptionQuantityArticle number
Solid Tine 12x20040311.112.200
Solid Tine 12x250402381837
Solid Tine 12x300402381838
Solid Tine 18x20020311.118.200
Requires
Adapter 18mm tines (3/4")202451800
 
Solid Tine 18x250202381841
Requires
Adapter 18mm tines (3/4")202451800
 
Solid Tine 18x300202382638
Requires
Adapter 18mm tines (3/4")202451800
 
Solid Tine 18x35020311.118.350
Requires
Adapter 18mm tines (3/4")202451800
 
Solid Tine 18x400202382639
Requires
Adapter 18mm tines (3/4")202451800
 
Solid Tine 24x22520311.124.225
Solid Tine 24x35020311.124.350
Hollow Tine 10x80 (8 shank)40311.210.080
Requires
Adapter 8mm tines (5/16")40314.208.043
 
Hollow Tine 10x80 (8 shank)80311.210.080
Requires
MTH Block for (8) tines 8mm (5/16")109990211
 
DescriptionQuantityArticle number
Hollow Tine 10x125 (8 shank)40311.210.127
Requires
Adapter 8mm tines (5/16")40314.208.043
 
Hollow Tine 10x125 (8 shank)80311.210.127
Requires
MTH Block for (8) tines 8mm (5/16")89990211
 
Hollow Tine 16x150 (12 shank)40311.216.150
Hollow Tine 16x175 (12 shank)409990022
Hollow Tine 19x150 (12 shank)40311.219.150
Hollow Tine 19x200(18 shank)20311.219.200
Requires
Adapter 18mm tines (3/4")202451800
 
Hollow Tine 19x200 (12 shank)40311.219.201
Hollow Tine 19x225 (18 shank)20311.219.225
Requires
Adapter 18mm tines (3/4")202451800
 
Hollow Tine 19x225 (12 shank)40311.219.226
Hollow Tine 19x250 (12 shank)409990040
Hollow Tine 19x250 (18 shank)209990023
Requires
Adapter 18mm tines (3/4")202451800
 
Hollow Tine 25x200 (18 shank)20311.225.200
Requires
Adapter 18mm tines (3/4")202451800
 
Hollow Tine 25x225 (18 shank)20311.225.225
Requires
Adapter 18mm tines (3/4")202451800
 
Hollow Tine 25x250 (18 shank)209990024
Requires
Adapter 18mm tines (3/4")202451800
 
Hollow Tine 29x250 (18 shank)209990066
Requires
Adapter 18mm tines (3/4")202451800
 
Hollow Tine 32x21x300mm (1 1/4x13/16x12)") MD: 24mm209990034
Hollow Tine 32x300 (18 shank)209990041
Requires
Adapter 18mm tines (3/4")202451800
 
Cross Tine 12x90 (8 shank)409990020
Requires
Adapter 8mm tines (5/16")40314.208.043
 
Cross Tine 12x90 (8 shank)809990020
Requires
MTH Block for (8) tines 8mm (5/16")109990211
 
Cross Tine 12x90 (12 shank)40311.812.090
Cross Tine 19x120 (12 shank)409990021
Chisel Tine 4.8x19x175 (12 shank)40311.619.175
Chisel Tine 4.8x19x120 (12 shank)40311.619.120
* This product may not be available for your region - Redexim reserves the right to change specification of products without prior notice, specifications of equipment may vary globally - illustrations are for visual representation only.
Click to access the login or register cheese