Je maakt gebruik van een sterk verouderde webbrowser waardoor deze website mogelijk niet goed functioneert, stap nu over op een moderne webbrowser.
Je maakt gebruik van een sterk verouderde webbrowser waardoor deze website mogelijk niet goed functioneert, stap nu over op een moderne webbrowser.
The all-new 2519 Verti-Drain combines robustness with versatility. This high-speed model can achieve a maximum working depth of 10”/250mm with a range of tines, while offering unrivalled productivity; this makes the 2519 the obvious choice for applications where agility and productivity are key.
| High-speed | |
| Suitable for a range of surface types | |
| Hollow or solid tines | |
| Do you require penetration of heavy soils? If so, consider the 75 or 76 Series Verti-Drain |
| SKU | 111.251.904 |
| Working width (m) | 1.95 |
| Working width (inch) | 76.7 |
| Max. Working depth (mm) | 250 |
| Max. Working depth (inch) | 10 |
| Working speed at hole spacing 65 mm | 1.79 |
| Working speed at hole spacing 2-1 2 inch (mph) | 1.1 |
| Weight (kg) | 943 |
| Weight (lbs) | 2074 |
| Max diameter solid tine (mm) | 18 x 250 |
| Max diameter solid tine (inch) | 3/4 x 10 |
| Max diameter hollow tine (mm) | 25 x 250 |
| Max diameter hollow tine (inch) | 1 x 10 |
| Min. Tractor HP required | 60 |
| Max. capacity with spacing 65 mm (m² hr) | 3490 |
| Max. capacity with spacing 2-1 2 inch (ft² hr) | 37566 |
| Three-point hitch | 3-Point CAT 1/2 |
| Rpm Max. | 540 |
| Gearbox oil | 80W90 - 1.2 (0.31 gallon) |
| Lubricant | EP 2 |
| Dimensions (width mm) | 2314 |
| Dimensions (height mm) | 963 |
| Dimensions (length mm) | 1250 |
| Dimensions (width inch) | 91.1 |
| Dimensions (height inch) | 37.9 |
| Dimensions (length inch) | 49.2 |
| Slip clutch setting | 550 Nm (4868 lbf-in) |
| Min. lifting capacity 610mm behind the lifting eyes (kg) | 920 |
| Min. lifting capacity 610mm behind the lifting eyes (lbs) | 2028.25 |
| Solid Tine 12x250mm (1/2x10") | |
| Toolbox with combi tool and manual | |
| PTO Shaft | |
| Storage Legs |
| Description | Quantity | Article number |
|---|---|---|
| Windrow Kit for 2519 | 1 | 211.251.908 |
| Turf Hold Down Kit for 12mm tines - 2519 | 1 | 211.251.902 |
| Turf Hold Down Kit for 18mm tines - 2519 | 1 | 211.251.904 |
| Anti-vibration system | 1 | 211.700.500 |
| Solid Tine 5x125mm (3/16x5") | 30 | 311.105.125 |
| Requires | ||
| Adapter 5mm tines (3/16") | 30 | 314.205.043 |
| Solid Tine 5x125mm (3/16x5") | 210 | 311.105.125 |
| Requires | ||
| MTH Block for (5) tines 8mm (5/16") | 10 | 211.700.016 |
| Solid Tine 8x150mm (5/16x6") | 30 | 311.108.150 |
| Requires | ||
| Adapter 8mm tines (5/16") | 30 | 314.208.043 |
| Solid Tine 8x150mm (5/16x6") | 60 | 311.108.150 |
| Requires | ||
| MTH Block for (8) tines 8mm (5/16") | 10 | 9990208 |
| Solid Tine 8x175mm (5/16x7") | 30 | 9990056 |
| Requires | ||
| Adapter 8mm tines (5/16") | 30 | 314.208.043 |
| Solid Tine 8x175mm (5/16x7") | 60 | 9990056 |
| Requires | ||
| MTH Block for (8) tines 8mm (5/16") | 10 | 9990208 |
| Solid Tine 8x250mm (5/16x10") | 30 | 9990059 |
| Requires | ||
| Adapter 8mm tines (5/16") | 30 | 314.208.043 |
| Description | Quantity | Article number |
| Solid Tine 12x150mm (1/2x6") | 30 | 311.112.150 |
| Solid Tine 12x200mm (1/2x8") | 30 | 311.112.200 |
| Solid Tine 12x225mm (1/2x9") | 30 | 311.112.225 |
| Solid Tine 18x200mm (3/4x8") | 20 | 311.118.200 |
| Solid Tine 18x225mm (3/4x9") | 20 | 311.118.225 |
| Solid Tine 18x250mm (3/4x10") | 20 | 2381841 |
| Hollow Tine 10x6x80mm (3/8x1/4x3") | 30 | 311.210.080 |
| Requires | ||
| Adapter 8mm tines (5/16") | 30 | 314.208.043 |
| Hollow Tine 10x6x80mm (3/8x1/4x3") | 60 | 311.210.080 |
| Requires | ||
| MTH Block for (6) tines 8mm (5/16") | 10 | 9990206 |
| Hollow Tine 10x6x125mm (3/8x1/4 x 5") MD:8mm | 30 | 311.210.127 |
| Requires | ||
| Adapter 8mm tines (5/16") | 30 | 314.208.043 |
| Hollow Tine 10x6x125mm (3/8x1/4 x 5") MD:8mm | 60 | 311.210.127 |
| Requires | ||
| MTH Block for (6) tines 8mm (5/16") | 10 | 9990206 |
| Hollow Tine 16/10x150mm (5/8x3/8x6") MD:12mm | 30 | 311.216.150 |
| Hollow Tine 16/10x175mm (5/8x3/8x7") MD:12mm | 30 | 9990022 |
| Hollow Tine 19/12x150mm (5/8x3/8x6") MD:12mm | 30 | 311.219.150 |
| Hollow Tine 19/12x200mm (3/4x1/2x8") MD: 18mm | 20 | 311.219.200 |
| Hollow Tine 19/12x200mm (3/4x1/2x8")MD: 12mm | 30 | 311.219.201 |
| Description | Quantity | Article number |
| Hollow Tine 19/12x225mm (3/4x1/2x9") MD: 12mm | 20 | 311.219.225 |
| Hollow Tine 19/12x225mm (3/4x1/2x9") MD:12mm | 30 | 311.219.226 |
| Hollow Tine 19/12x250mm (3/4x1/2x10") MD:12mm | 30 | 9990040 |
| Hollow Tine 19/12x250mm (3/4x1/2x10") MD:18mm | 20 | 9990023 |
| Hollow Tine 25/16x200mm (1x5/8x10") MD: 18mm | 20 | 311.225.200 |
| Hollow Tine 25/16x225mm (1x5/8x9") MD:18mm | 20 | 311.225.225 |
| Hollow Tine 25/17x250mm (1x5/8x10") MD: 18mm | 20 | 9990024 |
| Cross Tine 12x90mm (1/2x3 1/2") MD: 8mm | 30 | 9990020 |
| Requires | ||
| Adapter 8mm tines (5/16") | 30 | 314.208.043 |
| Cross Tine 12x90mm (1/2x3 1/2") MD: 8mm | 60 | 9990020 |
| Requires | ||
| MTH Block for (6) tines 8mm (5/16") | 10 | 9990206 |
| Cross Tine 12x90mm (1/2x3 1/2") MD:12mm | 30 | 311.812.090 |
| Cross Tine 19x120mm (3/4x5") MD:12mm | 30 | 9990021 |
| Chisel Tine 4.8x19x175mm (3/16x3/4x7") MD:12mm | 30 | 311.619.175 |
| Chisel Tine 4.8x19x120mm (3/16x3/4x4 3/4") MD:12mm | 30 | 311.619.120 |
Redexim North America
PaulH@redeximna.com
t +1(0)636 825 8300
f +1(0)636 825 8302
Redexim World Headquarters
redexim@redexim.com
t +31 (0)30 69 33 227
Redexim United Kingdom
sales@redeximuk.com
t +44(0)1428 661222
